Cadac CDC four User Manual download pdf (Page 39)

Revision 1 2012-13CDC FOUR

Groups

A detailed block diagram of the Groups may be found in the Appendix on

page 76.

The CDC FOUR has four mono groups, with outputs on the rear panel. They may

be used either for recording or other external purposes, or the outputs may be

ignored, and they can form su/jointfilesconvert/1717685/bgroups into the main stereo mix.

Some channel functions are absent from groups (relative to the input channels).

The differences from a mono channel are summarised below. The description of

the mono mic/line channel applies in all other respects. Refer to Page 32 onwards

for full details.

Input stage:

All input functionality is removed. The Input Trim, high-pass lter and phase

controls are inoperative and their virtual counterparts do not appear on-screen.

Noise gate:

The groups do not have noise gates. All noise gate controls are inoperative and

their virtual counterparts do not appear on-screen.

Limiter:

The groups’ dynamics sections have a dedicated limiter as well as the compressor

section tted to the input channels.

THR - adjusts the threshold of the group’s separate limiter section in the range

-40 dB to +21 dB. Default setting is +21 dB (i.e., no limiting).

IN - switches the limiter into the signal chain. Default is Out.

Aux Sends:

The groups do not have Aux Send facilities. All Aux Send controls are inoperative

and their virtual counterparts do not appear on-screen.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 82 83

No comments

Cadac CDC four User Manual Page 39