Cadac CDC four User Manual download pdf (Page 51)

Revision 1 2012-13CDC FOUR

Other screen pages

The TFT screen has several further pages available; some of these are selected

by the buttons to the left of the display:

Two further “Detail” pages – EQ Detail and Dynamics Detail are opened from

Softkeys on the Channel Overview page.

Channel

The Channel pages displayed for the various types of channel have already been

described in detail. The Channel page for the currently selected channel (the one

in the current layer with its SEL button illuminated) may be displayed at any time

by pressing the CHN button.

Routing

The ROUTE button opens the Routing screen page.

The page is arranged in tabular form, with channels as rows. The columns

represent, from left to right, routing status to Groups 1 to 4 (G1 – G4) and the left

and right legs of the main stereo output (L and R); these may be displayed as ON

or off; followed by the send level to each of the eight Aux busses (A1 - A8) and

the two internal FX sends (FX1 and FX2). The send levels are displayed directly

in dBs relative to “full level”, with – ∞ indicating ‘off’, and a level range of -75 to 0.

Note that the level is followed by an asterisk (*) if the send is selected pre-fade.

Inactive routings appear in black. When a routing button on the CAM is pressed,

the corresponding routing ag turns blue and the legend changes. The Aux and

FX sends are black when the send is not enabled by its ON button, and turns

blue when it is pressed. Note that the actual send level is still displayed when the

send is OFF; this allows a send level to be preset but the send itself muted until

required, as would be the case with an analogue mixer.

USB

ADJUST

CENTRAL CONTROL MODULE

METERS

SCENE

ROUTE

SYSTEM

CHN

TALK

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 82 83

No comments

Cadac CDC four User Manual Page 51