Cadac CDC four User Manual download pdf (Page 45)

Revision 1 2012-13CDC FOUR

Stereo master

A detailed block diagram of the Stereo master may be found in the Appendix on

page 78

The stereo master channel on the CDC FOUR differs from all the other channel

types in several respects, most importantly, the absence of a SEL button, and the

provision of a dedicated set of controls. The controls and facilities on the Stereo

Master Output Module (SMOM) are very similar to those which the CAM provides

to the other channel types.

The TFT screen can be selected to display the stereo master channel by pressing

Softkey 8 from any other page:

Derived outputs

The main stereo outputs from the left and right leg D-to-A converters in the stereo

master output channel are also routed internally to the stereo tape outputs (TAPE

L OUT and TAPE R OUT) and the mono sum output (MONO). All outputs are fully

buffered from each other.

The stereo tape outputs provide an identical balanced signal to that at the stereo

master outputs, except that 3-pole ¼” jacks are used.

The mono sum is a balanced (L+R) - 6dB sum of the master stereo output.

The facilities of the Stereo Master Output Module are as follows:

20:11:1

HI LO

FREQ

LIM

THR

COMP

LVL

RAT

THR

HMF

LMF

STEREO MASTER OUTPUT MODULE

LIM

LRGR

AUT

VIN

BYP

PST

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 82 83

No comments

Cadac CDC four User Manual Page 45