Cadac CDC four User Manual download pdf (Page 40)

Revision 1 2012-13 CDC FOUR

FX Sends:

The groups cannot send to the internal FX processors. All FX Send controls are

inoperative and their virtual counterparts do not appear on-screen.

Routing and metering section:

Any of the four groups may be routed to the main LR stereo buss, permitting their

use as su/jointfilesconvert/1717685/bgroups. The groups default with this routing enabled. The PAN control

is always in circuit, and with the control at its centre position (50/50, the default

value), the mono group signal feeds the left and right legs of the main stereo buss

equally, and is thus in the centre of the main stereo image. Full left-right panning

is possible, using either the PAN control on the CAM or via the screen using the

ADJUST control. However, the pan control IN button is disabled.

1 - 4 – the four group routing buttons 1 to 4 are not available to groups; thus it is

not possible to route a group to another group (or itself!).

L & R – a group may be routed to either the left or right legs of the main stereo

buss individually, though the setting of the PAN control will affect the level (i.e.,

routing to L and panning fully right will result in no signal).

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 82 83

No comments

Cadac CDC four User Manual Page 40