Cadac LIVE1 User Manual download pdf (Page 15)

Revision L1.1 2011-12Live1

1. Mono channel inputs – 3-pin Neutrik Combo A Series connectors. These

accept either a standard 3-pin XLR male plug for microphone use, or a

1/4” (6.35 mm) 3-pole (TRS) jack plug for line level use. The inputs are

electronically balanced; the mic inputs have an impedance of 1.2 kohms

and the line inputs an impedance of approximately 10 kohms. The

sensitivity of the line input is 16 dB lower than that of the mic input, and the

maximum input level is +21 dBu. 48 V phantom power is available at the

XLR pins, via a switch on the channel strip. The connector should be wired

as follows:

XLR Pin TRS jack Connection

1 Sleeve Screen

2 Tip Signal ‘hot’ (phase)

3 Ring Signal ‘cold’ (antiphase)

2. Mono channel inserts - ¼” (6.35 mm) 3-pole (TRS) jack sockets, for the

connection of external processing. The insert is post-EQ and pre-fade/mute.

Both send and return are unbalanced, at a nominal level of 0 dBu. The

output impedance of the send is 100

. Max. return input level is +10 dBu,

with an impedance of 10 k . The connector should be wired as follows:

Pin Connection

Tip Send

Ring Return

Sleeve Screen (common)

3. Mono channel direct outputs – ¼” (6.35 mm) 3-pole (TRS) jack sockets.

These are unbalanced post-fade/mute outputs from each mic channel, and

can be used for multitrack recording or other purposes. The outputs have a

nominal level of 0 dBu and a max. level of +21 dBu. The connector should

be wired as follows:

Pin Connection

Tip Signal ‘hot’ (phase)

Ring

Screen

Sleeve

4. Stereo channel inputs - ¼” (6.35 mm) 3-pole (TRS) jack sockets. The

inputs to the four stereo line channels are balanced, with separate sockets

for left and right inputs. Nominal input level is 0 dBu into 10 k

, maximum

input level +21 dBu. The connector should be wired as follows:

Pin Connection

Tip Signal ‘hot’ (phase)

Ring Signal ‘cold’ (antiphase)

Sleeve Screen

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

Cadac LIVE1 User Manual Page 15

Comments to this Manuals

Related products and manuals for Control panel Cadac LIVE1